0086-29-62577373
The composite insulator contents 3 parts ,fiberglass core rod,silicone rubber and the metal fittings.The function of the fiberglass is inner insulation and afford the mechanical load, the metal fittings are used for connecting the insulation parts with live line and the tower. Silicone rubber is the part for protecting the fiberglass rod against the UV and increase the creapage of the insulator.

FRP Pultrusion information

Pultrusion is a continuous process for the manufacture of products having a constant cross section, such as rod stock, structural shapes, beams, channels, pipe, tubing, fishing rods, and golf club shafts. Pultrusion produces profiles with extremely high fiber loading, thus pultruded products have high structural properties.
Pultrusion is a manufacturing process for producing continuous lengths of FRP structural shapes. Raw materials include a liquid resin mixture (containing resin, fillers and specialized additives) and reinforcing fibers. The process involves pulling these raw materials (rather than pushing as is the case in extrusion) through a heated steel forming die using a continuous pulling device. The reinforcement materials are in continuous forms such as rolls of fiberglass mat or doffs of fiberglass roving. As the reinforcements are saturated with the resin mixture (“wet-out”) in the resin impregnator and pulled through the die, the gelation (or hardening) of the resin is initiated by the heat from the die and a rigid, cured profile is formed that corresponds to the shape of the die.

 

Pultruded FRP channels offer a unique combination of chemical resistance, light weight, high strength, thermal/electric non-conductivity, easy to install and maintain, rich color to choose etc. So, they can be used in the fields of chemical anti-corrosion, construction, electric insulation, power development and telecommunications etc.

Any profile can be designed according to customers’ requirement.
Corrosion resistance: FRP pultrusion grille has excellent corrosion resistance performance, different levels of acid, alkali, organic solvents and salt, and many other corrosion of gas and liquid medium, because of its rich resin on the surface of a molded grating is low, so the molded grating is slightly worse than its decay resistance performance. According to the practical application requirements, can choose to use economically o-type, between benzene, vinyl resin base material. Light weight, high strength, FRP pultrusion grille is will and continuous glass fiber mat, such as surface mat reinforced material by the pultrusion resin infiltration heat. High glass fiber content (60%) makes it a one-way than intensity and stiffness is quite prominent. Oxygen index of flame retardant: general FRP pultrusion gridiron over 33, the flame propagation rate (according to ASTM E - 84 testing) < 25, as the flame retardant grade, and get the American bureau of shipping (ABS) approval. Phenolic pultrusion grille oxygen index (GB8924) reached 100, ASTM E - 84 test flame propagation speed is 5, smoke density of 10. Resistance to impact and fatigue resistance, and molding FRP pultrusion gratings with high impact strength, allowing repeated bending without permanent deformation; With moderate elasticity that enables the long-term work in the above feels comfortable. Skid: FRP pultrusion grating surface linear antiskid groove design in advance, also can be spread by binder sand extra prevent slippery effect. Ageing resistance: FRP pultrusion grille to choose high quality resin, glass fiber system manufacturing, ensure the service life of the products in more than 20 years. Although after atmospheric exposure, appearance change, but twenty years later strength can still remain in the more than 
The composite insulator contents 3 parts ,fiberglass core rod,silicone rubber and the metal fittings.The function of the fiberglass is inner insulation and afford the mechanical load, the metal fittings are used for connecting the insulation parts with live line and the tower. Silicone rubber is the part for protecting the fiberglass rod against the UV and increase the creapage of the insulator.
12<<>>4  per page   A total of
No.1 building, Saigao Guoji, Weiyang Economic-Technological Development Area,Xi'an City,shaanxi, China
Tel: 0086-29-62577373         Hotline: 0086-18691833098    Web:www.kig-tech.com